Epson/IBM Printer Control Codes

  These are the printer control codes for IBM/Epson - compatible printers.

  Hex Dec  Description
  ▀▀▀ ▀▀▀  ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
  07    7  (BEL) sounds a beep
  09    9  (HT) move to next tab stop  (See ESC D)
  0a   10  (LF) Linefeed: moves the paper up on line
  0b   11  (VT) feed lines to next vertical tab stop (See ESC B)
  0c   12  (FF) Formfeed: advance to top of page (See ESC C)
  0d   13  (CR) Carriage Return: prints line (no linefeed)
  0e   14  start DOUBLE-WIDTH printing (ends on CR or LF.  See ESC W)
  0f   15  start COMPRESSED mode printing
  11   17  select printer
  12   18  end COMPRESSED mode printing
  13   19  deselect printer
  14   20  end DOUBLE WIDTH printing
  18   24  (CAN) clears the printer buffer
  1b   27  (ESC) lead-in code for multi-character sequences (See below)
  7f  127  (DEL) clears the printer buffer

 These ESC sequences are arranged by rough functional groups.  Values shown
 in the form  indicate binary codes.

 ASCII      Hex          Description
 ▀▀▀▀▀▀▀▀▀  ▀▀▀▀▀▀▀▀▀▀▀  ▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀
                         Fonts / Print Options
 ESC - <1>  1b 2d 01     begin UNDERLINE
 ESC - <0>  1b 2d 00     end underline

 ESC E      1b 45        start EMPHASIZED-MODE printing
 ESC F      1b 46        end emphasized-mode printing

 ESC G      1b 47        start DOUBLE-STRIKE printing
 ESC H      1b 48        end double-strike printing

 ESC S <0>  1b 53 00     start SUPERSCRIPT printing
 ESC S <1>  1b 53 01     start SUBSCRIPT printing
 ESC T      1b 54        end Superscript or Subscript printing

 ESC W <1>  1b 57 01     start DOUBLE-WIDTH printing (not canceled by LF)
 ESC W <0>  1b 57 00     end double-width printing

 ESC 6      1b 36        select character set 2
 ESC 7      1b 37        select character set 1

                         Line Spacing / Page Length
 ESC 0      1b 30        8 LPI: start 1/8-inch line height
 ESC 1      1b 31        start 7/72-inch line height

 ESC 3   1b 33 xx     set variable line spacing to /216-inch
 ESC J   1b 4a xx     set line height to /216-inch for next LF (0aH)
 ESC 2      1b 32        execute variable-height line feed (See ESC A) also
                         6 LPI: set 1/6" line height (if no prior ESC 2)
 ESC A   1b 41 xx     select a line height of /72-inch.
                           (this is a one-shot linefeed triggered by ESC 2)

 ESC C   1b 43 xx     set lines per page to n (0-7fH)
 ESC N   1b 4e xx     set skip perforation to  lines
 ESC O      1b 4f        cancel perforation skip

                         Miscellaneous
 ESC 8      1b 38        ignore end of paper
 ESC 9      1b 39        cancel ignore end of paper
 ESC <      1b 3c        home head
 ESC U <1>  1b 55 01     start uni-directional printing
 ESC U <0>  1b 55 00     start bi-directional printing

 ESC B             set VERTICAL TAB STOPS (send ESC B followed by a
            1b 42 xx..00    series of binary values, ending in a byte of 0)
 ESC D             set HORIZONTAL TAB STOPS (send ESC D followed by a
            1b 44 xx..00    series of binary values, ending in a byte of 0)

                         Graphics
 ESC K   480-dot bit-image grafix.  Print n1+(256*n2) bytes
            1b 4b xx xx yy..yy   (top dot for bit 0, bottom dot for bit 7)

 ESC L ...  1b 4c ...    960-dot graphics--slow mode (See ESC K, ESC Y)

 ESC Y ...  1b 59 ...    960-dot bit-image graphics--fast mode  (See ESC K)
                           (can't print in consecutive dot positions)
 ESC Z ...  1b 59 ...    1920-dot bit-image graphics (See ESC K for format)
                           (can print only every third consecutive dot)

See Also: ASCII Control Codes
          Character Set Matrix
          ASCII■Decimal■Hex■Binary XRef
          ASCII
                                    -*-