|
|
The N1MNX repeater system is proudly supported by: Dave
N1MNX Click Photos for larger view |
|
|
|
The N1MNX repeater system is proudly supported by: Dave
N1MNX Click Photos for larger view |
|
|
The repeater system is located in Pepperell at a ground elevation of 460 feet ASL. The equipment is housed in 6-foot by 9-foot building adjacent to a 128-foot tower. The repeater system consists of repeaters for 6m, 2m, 2m packet, 220 MHz, 440 MHz, and GMRS. The 6-meter repeater the transmitter is a modified GE executive II with a power output of 50w. The receiver is a Ramsey kit which was modified for better performance and the antenna is a homebrew vertical array.
|
|
| The 2-meter repeater consists of a Kendercon Mark #4CR with a power out of 10w. The antenna is a Hustler 7dB gain collinear at 70 feet. |
|
 |
The 1.25 m repeater consists of a Kendercon Mark #4CR with a power out of 50w. The antenna is a Hustler 7dB gain collinear at 128 feet. The 2-meter packet repeater is a commercial GE Phoenix with a Kantronics KPC-3 TNC. The power output is 25w and the repeater uses an MFJ vertical at 128 feet.
|
| The 70 cm repeater consists of two commercial Kenwood transceivers and a Henry power amplifier. The output power is 50w. The antenna is a Hustler 6 dB gain collinear at 128 feet. |
|
