kX Project-Install 2 Sound Cards
Pinouts of kX compatible cards
     Page F

 

Most of the following pinouts were taken from Driverheaven:

http://www.driverheaven.net/showthread.php?t=51505



 

AUD_EXT connector pin assignments

Note

ADC stands for Analog-to-Digital Converter

Pin     Name          Description
     

01     VCC          +5V power supply
02     VCC          +5V power supply
03     GND          Ground
04     AC97CLK     24.5 MHz clock output
05     GND          Ground
06     GP_SPDIFIN#2     SPDIF input signal
07     GND          Ground
08     GND          Ground
09     SPDIFO#3     SPDIF Out signal
10     GPO1          General Purpose Output #1
11     GPO2          General Purpose Output #2
12     GND          Ground
13     GPO0          General Purpose Output #0
14     GND          Ground
15     GP_SPDIFIN1     SPDIF Input signal
16     GND          Ground
17     SPDIFO#0     SPDIF Out signal

18     GND          Ground
19     SPDIFO#1     SPDIF Out signal
20     GND          Ground
21     GND          Ground
22     SPDIFO#2     SPDIF Out signal
23     GPI0          Digital Input (GP Input 0; Reserved)
24     GPI1          Digital Input, (GP Input 1; Reserved)
25     OUTMIDI          MIDI Output
26     GND          Ground
27     INMIDI          MIDI Input
28     GND          Ground
29     KEY
30     KEY
31     ADCSDO2     I2S audio data input.
32     GND          Ground
33     ADCSDO1     I2S audio data input.
34     GND          Ground
35     ADCSDO0     I2S audio data input.
36     GND          Ground
37     I2SCLK          I2S serial bit clock.

38     GND          Ground
39     I2SFS          Frame sync.
40     GND          Ground

Copyright © 1998-2000 Creative Technology, Ltd.

Code:



 

CD_IN/AUX_IN connector pin assignments

Pin     Description     I/O


1     Left Channel     In
2     Ground     -
3     Ground     -
4     Right Channel     In

Copyright © 1998-2000 Creative Technology, Ltd.



 

VOL_CTRL connector pin assignments (for PCI cards)

Pin     Description     I/O


1     VOLDECB        In
2     GND           Ground
3     VOLINCB        In
4     GND           Ground

Copyright © 1998-2000 Creative Technology, Ltd.



 

CD_SPDIF In connector pin assignments

Pin     Description     I/O
1     GND     -
2     SPDIF     In

Copyright © 1998-2000 Creative Technology, Ltd



 

SPDIF_EXT connector pin assignments
For 12-pin SPDIF connector (CT4670 is one example)
Found on SBLive Value cards

Pin     Description
1     SPDIFO0
2     GND
3     KEY
4     VCC
5     GND
6     SPDIFIN
7     NC
8     NC
9     SPDIFO1
10     GND
11     SPDIFO2
12     SPDIFO3

Copyright © 1998-2000 Creative Technology, Ltd



 

SPDIF_CONN connector pin assignments
For 6-pin SPDIF connector

Pin     Description
1     SPDIFO0
2     GND
3     KEY
4     VCC
5     NC
6     NC

Copyright © 1998-2000 Creative Technology, Ltd.



 

Connector for the SB0220, maybe SB0240-not sure
(This information, for the SB0220 was taken from a forum thread and is untested-use at your own peril)

  1. - SPDIF out TTL level
  2. - Ground
  3. - SPDIF IN
  4. - Ground
  5. - +5V

Pin 1 is the pin closest to the where the PCI connects into your mobo.



 

AD_EXT Connector
Audigy 2 card


PIN    PIN
#          #

01 O X 02
03 O O 04
05 O O 06
07 O O 08
09 O X 10
11 X X 12
13 O O 14
15 O O 16
17 O O 18
19 O O 20
21 O O 22
23 O O 24
25 O O 26
27 O O 28
29 O O 30
31 O O 32
33 O O 34
35 O O 36
37 O O 38
39 O O 40




AD_EXT connector pin descriptions
Audigy 2 card

Pin     Description


1     +5V
2     --
3     GND
4     GND
5     SPDIF0 IN
6     GND
7     GND
8     GND
9     SPDIF0 OUT
10     --
11     KEY (No pin here)
12     KEY (No pin here)
13     P16VCLK 24.576 Mhz Clock
14     GND
15     I2S Framesync
16     GND
17     I2S BitClock
18     GND
19     I2S input to P16V (Aux2)
20     GND
21     I2S input to P16V (Line-In2 / Mic2
22     GND
23     GPO1 (GP output 1)
24     GPO2 (GP output 2)
25     GPO0 (GP output 0)
26     GND
27     SPDIF3 OUT
28     GND
29     SPDIF1 OUT
30     GND
31     SPDIF2 OUT
32     GND
33     GPI1 (GP input 1)
34     To TAD connector!
35     GPI0 (GP input 0)
36     To Pin 10 @ J1!
37     UART (MIDI) OUT
38     GND
39     UART (MIDI) IN
40     --

June 2004 by Samir, thanks to TravelRec and Quenotte
Connect pins 25 & 35 to fake Audigy Drive! (I have no idea what that means, I am just copying).

There is another note that says this MIGHT also be the pinout for the X-Fi cards.

taken from the following URL:
http://www.driverheaven.net/showthread.php?t=51505

 

A - kX Project-Short Introduction

B - kX Project-Uninstall the Creative Labs drivers-Windows 98SE

C - kX Project-Install the kX drivers

D - kX Project-Install a second card

E - kX Project-Create a custom DSP

F - kX Project-Pinouts of kX compatible cards