The Sentra's Hybrid Center Console:

From this angle, you can see the NX2000 center console.  The lid on the console

was broken, so I had to find a new one.  A temporary fix was to use a lid from an old-school

200SX.  This set-up was okay, but I missed the higher armrest that the stock armrest had provided.

I found a G20 at a junkyard, and I thought the armrest would fit in the Sentra - it did.  The

G20's armrest needed to be recovered because the leather was cracked and worn.  I used the old

leather as a template, and I cut a piece of black vinyl to fit.  I have sense worked with Keepsake, and he is now

 offering a replacement leather covering, as shown in the top pictures.

I am very happy with this set-up.  It is the perfect height, I feel.  The only drawback would be

that I've found it easier to raise the lid to buckle the seatbelt, and then lower the lid back down.

I think my seats look like a zebra pattern because I took these pictures on my cameras

lowest resolution.  The are just the typical gray with blue accents.

Here is a picture of my Momo Raptor shift knob, and my leather shift boot available from Keepsake.

The shift boot fit great, and I love the feel.  It is black leather with "titanium" stitching.  I, also, shortened

the stock shifter.  I moved the "ball" to create a shorter throw, and I cut some of the threads off at the top.

I got the idea from a fellow forum member on sr20deforum.com.  The shifter is much improved.

HOME