[Home]
[Up]
[Carbon Fiber Prop]
[FiberGlass Canopy]
[Fat Boy Profile]
[Outlaw]
[CF Land Gear]

I like to build planes from kits or from scratch.  I also build specialty parts for the planes using carbon fiber and/or fiberglass.

Here is a carbon fiber propeller and spinner I manufactured (click on the picture for more pictures and details):

I built this canopy for the 35% scale Cap 232

I designed and built this large (82 inch span) profile plane.  First flown September 2005.  I call it the "Fat Boy" due to its thick (6 inch) wing.

This is a delta wing plane "Outlaw" built from Jerry Smith Plans

This is a Carbon Fiber Landing Gear I made for the 35% Cap 232.  Weighs 12.5 ounces and is strong enough to tear the bottom out of the plane in a bad landing.