HelmetCam 101(Good Info)clickhere

NEWFLASH: I have become good friends with everyone at JonesCam.tv. They have helped
me a good bit in making my videos. I have received a lot of emails about my helmet cam setup
and that is why I made this page. My friends at JonesCam.tv (Mike Jones and Pete)
have choosen to offer my friends a 5% discount if you call and mention you are my friend. So go
to their site by clicking the banner above and call JonesCam at (518) 235-2782. Make sure to tell
them your my friend and ask him for the Mudcon 5% discount. I researched a lot of companies and
Jonescam has the best customer service I found.

JonesCam Helmet Cam

What the Kit Includes*
Helmet Camera
480 Lines of Resolution Color
Sony ExView 1/3" CCD (NTSC only PAL version not available)
Waterproof (10ft), auto white balance and auto gain control * Size: 2 3/4" x 3/4" Dia
Signal to Noise Ratio: >50dB AGC Off

Lens Focal Length 3.6mm (92°) Standard
Optional Lens: ($25 each)
(6mm 54° and 2.9mm 120°)

Lapel Microphone

LANC remote video control with one push start/stop recording for your supplied LANC compatible Camcorder or palmcorder camera system **

Battery Case (8-cell AA Batteries not included)

Y Power Cable splitter

Velcro Mounting Strip (Industrial Strength and is sufficient for about 95% of all applications, attaches the camera head to your helmet, goggles or any flat surface)

JonesCAM Mount (For semi-permanent attachment via double sided sticky tape)

Lens Cleaner and Anti-Fogging Cloth

Foam padded Plastic Carry Case

Connectors
- 1 Channel Audio Out RCA Male Connector (microphone)
- 1 Channel Composite Video Out BNC Female (camera)
- 1 BNC Male to RCA Female Bullet (camera to RCA cable)
- 2 RCA female-to-female bullets (for attaching JonesCAM 48Helmet Camera System to RCA input Cable for Camcorder)
- 1 Coax Power Y-Cable
(Powers 480 Camera and 12V Lapel MIC from 8 AA cell Battery case, 9V plug to (2) 2.1mm x 5.5mm plugs)

I use 8 Energizer 2500mAh Rechargable Batteries that last over 2 full days
of straight run time that powers the cam and the microphone.

More Pics

I use ram mounts instead of mounting the cam to my Helmet
and I have multiple mounts set up on each ATV and can be
swapped in a matter of seconds. Pics of all are in the link above.

Also I use a Sony Hc-32 Mini DV Camcorder as my recording device,
and all my movies are captured and edited in Movie Maker 2.1

I use a Energizer 7.4v 90series (ER-C557) replacement battery that last
582 minutes Run time and will last a full day of playing.

Back to Homepage