Humphrey Whistles

*Stealth III Whistles*

Whistle Key:	Tube Diameter:	Bore Diameter:	Complete Whistle:	Additional Tube:
High G	7/16"	13/32"	$110.00	N/A
High F#	15/32"	7/16"	$115.00	$20.00
High F	15/32"	7/16"	$115.00	$20.00
High E	1/2"	15/32"	$120.00	$25.00
High Eb	1/2"	15/32"	$120.00	$25.00
Trad High D (Narrow Bore)	1/2"	15/32"	$120.00	$25.00
Session High D	17/32"	1/2"	$125.00	N/A
Wide Bore High D	9/16"	17/32"	$135.00	$35.00
High D+ (7-Hole D With C Foot)	9/16"	17/32"	$145.00	$45.00
High C#	9/16"	17/32"	$135.00	$35.00
Trad High C (Narrow Bore)	9/16"	17/32"	$135.00	$35.00
Session High C	19/32"	9/16"	$140.00	N/A
High B	5/8"	19/32"	$145.00	$45.00
Trad High Bb (Narrow Bore)	5/8"	19/32"	$145.00	$45.00
Session High Bb	21/32"	5/8"	$150.00	$50.00
Low A	21/32"	5/8"	$150.00	$50.00

Stealth III whistles are designed to look and feel very similar to traditional mass produced whistles, but are made to very strict tolerances and thoroughly tested before shipment.

The mouthpieces are made from black acetal, and are fastened together with a black acetal pin. Only close inspection reveals that they are not one-piece injection molded.

The tubes are made from a single length of brush finished brass tubing, and they are tunable by sliding the mouthpiece up and down on the tube. Each tube has a line etched in the upper end to serve as a reference point for tuning.

All Stealth III whistles will cross-finger the flattened 7th best using the traditional 'forked' fingering (OXX XOX). This is especially true for the 'Trad' whistles, which have narrow bore tubes.

Divider

*Journeyman III Whistles*

Whistle Key:	Tube Diameter:	Bore Diameter:	Complete Whistle:	Additional Tube:
High G	1/2"	13/32"	$125.00	N/A
High F#	17/32"	7/16"	$130.00	$35.00
High F	17/32"	7/16"	$130.00	$35.00
High E	9/16"	15/32"	$135.00	$40.00
High Eb	9/16"	15/32"	$135.00	$40.00
Trad High D (Narrow Bore)	9/16"	15/32"	$135.00	$40.00
Session High D	19/32"	1/2"	$140.00	N/A
Wide Bore High D	5/8"	17/32"	$150.00	$50.00
High D+ (7-Hole D With C Foot)	5/8"	17/32"	$160.00	$60.00
High C#	5/8"	17/32"	$150.00	$50.00
Trad High C (Narrow Bore)	5/8"	17/32"	$150.00	$50.00
Session High C	21/32"	9/16"	$155.00	N/A
High B	11/16"	19/32"	$160.00	$60.00
Trad High Bb (Narrow Bore)	11/16"	19/32"	$160.00	$60.00
Session High Bb	23/32"	5/8"	$165.00	$65.00
Low A	3/4"	5/8"	$165.00	$65.00
Low G#	13/16"	11/16"	$190.00	$85.00
Low G	13/16"	11/16"	$190.00	$85.00
Low F#	7/8"	3/4"	$195.00	$90.00
Low F	7/8"	3/4"	$195.00	$90.00
Low E	15/16"	13/16"	$205.00	$95.00
Low Eb	15/16"	13/16"	$205.00	$95.00
Low D	1"	7/8"	$210.00	N/A

Journeyman III whistles have the same mothpiece design as Stealth III whistles, but have thicker tubes made from aluminum instead of brass.

High whistles have tubes made from a single length of brush finished aluminum tubing, and are tunable by sliding the mouthpiece up and down on the tube. Each tube has a line etched in the upper end to serve as a reference point for tuning.

Low whistles from low A on down have thicker tubes, and from low G# on down are made from two sections of brush finished aluminum tubing connected by an internal tenon joint. The tenon joints require a light wrap of PTFE tape, and are primarily intended to be used to break down the whistle for more compact storage. Jointed tubes have tuning reference marks etched on the upper end of both sections, so you can use the tenon joint as a tuning slide if you wish.

All Journeyman III whistles will cross-finger the flattened 7th very well using OXX OOO.

Divider

Options

Tubes of the same diameter, regardless of key, will fit the same size mouthpiece. This makes it possible to have multi-tube sets that share a single mouthpiece, which is more economical than having complete whistles in each key.

For an additional $5.00 charge, left thumb holes may be added to any tube to allow a perfectly in tune flattened 7th note in both octaves without the need for cross-fingering.

For an additional $15.00 charge, low D tubes can be made with an extra tenon joint that allows you to rotate the bottom finger hole to your preferred position.

Divider

Shipping

Domestic orders will be shipped via fully insured priority mail.

International orders will be shipped via fully insured express mail.

You will be emailed a USPS tracking number once your order has been shipped, allowing you to track your package's progress and obtain a scheduled delivery date.

The value of any shipment is limited to the maximum insurable amount allowable per USPS restrictions, so it may be necessary to split large orders into multiple shipments.

Shipping charges for all orders will be determined in advance by using the USPS Postage Price Calculator.

You will only be charged the actual cost of shipping your order, with no added fees for handling or packaging.

Divider

Payment

Payment is required in full before your order will be shipped, no exceptions.

U.S. customers who wish to mail payment may send United States Postal Service or Western Union money orders only. Personal checks, cashier's checks, or money orders issued by any other institution cannot be accepted.

Western Union wire transfers are the only method of electronic payment currently accepted.

Non-U.S. customers who wish to mail payment may send an international postal money order payable in U.S. dollars if your countryexchanges international postal money orders with the United States Postal Service. International money orders issued by any other instituton cannot be accepted.

Western Union wire transfers are the only payment option currently available for non-U.S. customers who live in countries that do not exchange international postal money orders with the United States Postal Service.

Tennessee residents must also add 9.25% sales tax.

Divider

Refunds

Refunds will only be issued for items that are returned in like-new condition postmarked within 30 days of receipt.
Please use the original packaging or something similar for the return shipment.
The refund policy does not cover items that have been tweaked, modified, or damaged in any way, so please take exceptionally good care of your whistle during the 30 day trial period.
Refunds will be issued in the same form as payment was originally made, and will be sent out upon receipt of the returned shipment, providing it is received in satisfactory condition.
Shipping charges are non-refundable, and a $5 restocking fee for each returned whistle or multi-tube set will be deducted from the total refund amount.
The cost of postage for mailed refunds, or the transaction fee for wire transfer refunds will also be deducted from the total refund amount.
Lost or damaged items will be re-shipped or refunded as soon as the insurance claim is settled.
Not responsibile for uninsured returns that are lost or damaged in transit.

Divider


Contact Information:

Gary Humphrey Jr.
571 Frank Anderson Road
Sparta, TN 38583-7267
U.S.A.